Skip to content

SM2 PRO J2534 VCI Pcmflash ECU Programmer With Dongle KTM 67 in 1 Auto scanner

120.00

SM2 PRO J2534 VCI Pcmflash ECU Programmer With Dongle KTM 67 in 1 Auto scanner.

Package Contents:

1 x SM2 PRO VCI
1 x OBD2 cable
1 x USB cable
1 x Security key
1 x Power adapter

Warehouse: In stock
LT/LV/EE Delivery time: 1-3 working days
Europe Delivery time: 4-7 working days
International Delivery time: 7-10 working days
Express Delivery time: 1-3 working days

SKU: AUT0000210 Category: Tags: ,

What is difference between SM2 PRO J2534 VCI And BENCH , FLASH ,OBD?

1.different SN number
BENCH ,FLASH,OBD . All SN number is A55259.
Actually they are the same hardware, just a different case,you also can check the PCB board of them.
SM2 PRO J2534 VCI SN: A78370 . it is different as others in the market.
2.different hardware version
BENCH ,FLASH,OBD hardware version is 2.21.2 . from 03.2019 year. it is very old !
SM2 PRO J2534 VCI hardware version is 2.21.18 from April 14, 2022 . it is very new version . It’s already updated 16 versions vs others hardware. and it was added many new functions and more stable .

What are our Advantages:

  • Our hardware support all J2534 protocol software
  • Dont need register and active device. you can work it directly . and more pay attention to protecting personal privacy .
  • When you update your device by mistake. it will not be locked. you just come back to correct driver version to work.
  • Support newest cars and do online programming (with online account) .for example GDS software work with 2021 year GM Buick ENVISION, 2021 year CADILLAC XT5 .we have tested online programming and working perfect!!!

67 in 1 Active Licenses:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34 35 36 38 40 42 43 45 46 47 48 50 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

SM2 PRO J2534 VCI Functions:

  1. Read and write ECU data
  2. ECU clone
  3. ECU parameter adjustment
  4. ECU maintenance engineering
  5. Chip turing
  6. Read ECU maps
  7. Checksum correction
  8. Stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off ,vmax ,swirl off
  9. Read flash and ep files
  10. Powertrain adjustment
  11. Support online update
  12. VR files supply
  13. Pinout come with
  14. Helpdesk and tuner account
  15. OBD2 reading
  16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.
  17. Cover-opening data reading, boot mode

200 Newly-added Bosch MED/EDC17 Read/Write Protocols Without Opening the Cover.

VAG Simos 12.1, 12.2
VAG Simos PCR2.1
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubishi E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP

Coming Soon:

VAG Simos 18.1, 18.2
VAG Simos 18.10
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90

What program does it support:

1.Chrysler flash application
2.GM gds2 / SPS- Ford FDRs, Forscan
3.Hino DX2
4.Honda HDS
5.Land Rover Jaguar SDD
6.Nissan consult 3+- ODIS
7.Renault clip
8.Toyota Lexus Techstream
9.Vol Vida- Mer-cedes Benz xentry / Das Pass thru
10.Cummins insite
11.Cummins calterm ll
12.Caterpillar et- JCB service master4
13.Vol premium tech tool
14.WABCO toolbox
15.Eaton air conditioning system diagnostic software
16.Detroit dddl
17.Allison transmission diagnostic software
18.Noregon jpro truck diagnostic software
19.Other original software

It cannot support CAN FD

Please Note: above supports need buyer have software yourself and test in real operation, we don’t have after-sale service for those programmer.

Please note, USB Dongle can not update ,otherwise it will lose program.
SM2 PRO J2534 VCI (Software Version: 1.20) Support 67 modules All Opened Protocols:
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73, 74

This website uses cookies. By clicking "I Agree" you agree with our

privacy policy

0
    0
    Your Cart
    Your cart is emptyReturn to Shop