Warranty: 24 months
Offered Error Code Cleaner is standalone device. Using of it is very easy and fast, just:
- Turn ignition ON
- Connect Device to diagnostic connector of the vehicle.
- Working/Done lamp starts blinking, wait until lights up permanently green.
- Switch ignition OFF and disconnect eraser, that’s all!
- All inactive errors from supported systems are cleared!
Scania Eraser supported systems:
- Engine (S6, S7, MD1)
- Brakes – EBS
- Coordinator
- Tachograph
- Automatic Gearbox
- Retarder
- APS
- AdBlue
- All systems are supported
Supported Models (Series):
- R Series Euro 3 /4 / 5 / 6 Including Next Generation
- P Series Euro 3 /4 / 5 / 6 Including Next Generation
- T Series Euro 3 /4 / 5 / 6 Including Next Generation
- G Series Euro 3 /4 / 5 / 6 Including Next Generation
- K Series Euro 3 /4 / 5 / 6 Including Next Generation
- S Series
All Scania models from 2004 till now are supported!
This Device supports disabling Torque reduction / Speed reduction after Exhaust Aftertreatment System Failure !
The Error Code Cleaner check connection with the vehicle. If there is no connection with vehicle it inform about it with the “Error” indicator. Thanks to this you can be sure that unwanted errors have been removed!
Error Code Cleaner is equipped with tree controls:
- Power – is always Light when Cleaner have Power supply from diagnostic connector;
- Working/Done – this LED blinks when eraser is working and is permanently on when eraser finishes work with success;
- Error – is permanently ON if there is no connection with vehicle or blinks when device is connected to unsupported vehicle
