Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
Operating systems: Windows 10 Pro, Windows 11 Pro
System updates: Available
Internet connections: Available
Warranty: 12 months
Made in Germany
- It is compatible with all Citroen / DS cars from 1996 – onwards.
- It is compatible with all Peugeot cars from 1996 – onwards.
- It is compatible with all Vauxhall PSA architecture cars.
- Diagnostics is performed via 16 Pin OBD-II connector
This diagnostic interface contains CAN 2 x independent with FD option, 1 x low speed capable K / L-Line 2 x independent UART with 12/24 V supports DoIP Ethernet ISO 13400
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes:
this function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
- Dimensions 156 x 85 x 37 mm
- Weight 340 g
- Operational temperature -20 °C … + 70 °C
- Storage temperature – 40 °C… + 85 °C
- Housing Plastic ABS/PC
- Connectivity CPU 800 Mhz ARM
- Memory 8 GB Flash | 512 MB RAM
- Bluetooth 4.0
- WLAN Internal 2-stream 802.11 a/b/g/n (2,4/5 GHz)
- USB 2.0 High-Speed
- Ethernet 10/100
- MicroSD card slot þ (mechanically protected)
- CAN 2 x independent with FD option, 1 x lowspeed capable
- K / L-Line 2 x independent UART with 12/24 V support
- DoIP Ethernet ISO 13400
- Internal multiplexer for all vehicle interfaces
- Analogue voltage measurement for battery & ignition
- Automatic detection for up to 64 different cable types